Just one more moment...PTU

This tutorial was written on November 11, 2010 Shani aka Wicked Princess. The concept of the tag is mine and mine alone. Any resemblance to any other tag/tut is pure coincidence. This was written for those with working knowledge of PSP.

Supplies Needed:

++Paint Shop Pro ( I used 10 but any version should work)

++Scrap kit “Beyond Blue, Depression Awareness” kit by Designs by Stina which can be found at any of her stores on her blog HERE

++Choice of photo
++Font and mask of choice

**NOTES:
-Add Drop shadow of choice as you go
-You can merger layers as you want to make things easier for yourself.
Open several papers of choice, resizing as needed. For example, when I look at the blue bar where it tells me what I’ve opened (say like paper 2) it tells me what percentage I’m viewing it at. For me it’s usually 16%, so I resize to 16% bringing it to 100%. ( I hope that made sense!) Once you’ve done this, minimize for later use.
Open a new canvas of 800x800 (yes this is large, you can resize it later!) Open the paper of your choice and flood fill your new canvas with it.
Next open another paper of your choosing and copy and paste as a new layer. Move it towards the bottom of the canvas so it’s only showing about a quarter of the way. Open another paper of choice then copy and paste as a new layer. Move it to the left side with about a quarter of it showing also.
Open the postage stamp frame, resize it then copy and paste as a new layer. Open your photo of choice, and do what ever enhancements that you want to do to it. Copy and paste the picture below the frame. Using your magic wand tool, click inside the frame. Go to selections, expand, expand by 6. Go to seleections, invert. On the picture layer, hit the delete key. Go to selections, none. On the frame layer add your gradient glow of choice. Merge down one layer. Duplicate it and on the bottom one angle slightly.

Now open the bougainvillea flower of your choosing, resize then copy and paste as a new layer. Move it to the upper right of the frames, in between them. Duplicate it then go to image, mirror, then image flip. Adjust this one where you like it.
Now open the flower clip you like, resize it then copy and paste as a new layer. Move it to the bottom right hand corner of the frame. Duplicate it and spin it around where you like it. Add a flower you like over the top of these.
Next open a flower you like, resize then copy and paste as a new layer. Move it to the right side of the frame. Duplicate it several times and move it where you like it as a line down the side.

Then open the wrap ribbon you like, resize then copy and paste as a new layer and angled in the upper left hand corner.
Open the awareness ribbon of your choosing, resize it then copy and paste as a new layer to the bottom left of the frame. Add two butterflies where you like them.

Finally resize if you like, add any copyrights and texts.

Thank you for trying my tutorial!

Heroes Layout PTU

This tutorial was written on December 20, 2009 Shani aka Wicked Princess. The concept of the tag is mine and mine alone. Any resemblance to any other tag/tut is pure coincidence. This was written for those with working knowledge of PSP.
Supplies Needed:

++Paint Shop Pro ( I used 10 but any version should work)


++Scrap kit by I wanna be a Fire Fighter by Holy Scrap Ola and can be purchased HERE

++ 3 Pictures of your choosing. I chose pictures of a family member.


**NOTES:
-Add Drop shadow of choice as you go
-You can merger layers as you want to make things easier for yourself.

We’re doing something a little different, as this is a scrap page layout or picture tag.
- I am making this to tagger dimensions, but you can make it full size or what ever you like.

Open a paper of choice resize to 600x600. Open the burning building with hills. Resize it then copy and paste as a new layer. Adjust it and stretch it out as needed.

Then open your frame. Resize as needed copy and paste three pictures behind the frame. Using your magic wand tool, click inside each frame and go to selections, invert and hit the delete key. Go to selections none. Do this for each frame square. Add your drop shadow and merge visible. Copy and paste it as a new layer into your layout. I moved mine to about three quarters of the way down.

Open the fireman with the hose, resize him then copy and paste as a new layer, moving him below the frame. Adjust him so It looks like he is spraying the building.

Next pen the tree, resize it then copy and paste as a new layer to the bottom left of the frame. Add the fire hydrant after resizing to right below it.

Next open the fireman on the ladder and resize it. Copy and paste as a new layer. Add it to the right side of the frame, making it look like its leaning on it.

Now open the tree branch with the cat hanging off of it. Copy and paste after resizing to just above the guy on the ladder.

Then open the fire truck, resize it then copy and paste as a new layer, move to the bottom right of the frame.

Add one of the flairs you like to the middle of the far right frame and the middle one.

Now add the word art Heroes to the top of the buildings.

Add any text you like.

Save and your done!

Thanks for trying my tutorial.

Teach our Children Page Layout (PTU)

**SPECIAL TY TO MY FRIEND KELLI FOR THE USE OF HER PICTURES!**

This tutorial was written on December 11, 2009 Shani aka Wicked Princess. The concept of the tag is mine and mine alone. Any resemblance to any other tag/tut is pure coincidence. This was written for those with working knowledge of PSP.
Supplies Needed:

++Paint Shop Pro ( I used 10 but any version should work)

++Scrap kit by Sticky Kisses Designs called Christmas Time can be purchased HERE


++ Template 4 by Yanti Scraps can be found HERE

++Photo of your choice, a smaller one works best.


**NOTES:
-Add Drop shadow of choice as you go
-You can merger layers as you want to make things easier for yourself.

We’re doing something a little different, as this is a scrap page layout or picture tag.

Open the template in PSP, using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original. ***NOTE I RESIZED THE TEMPLATE BY 15%

Open several papers of choice, resizing as needed. For example, when I look at the blue bar where it tells me what I’ve opened (say like paper 2) it tells me what percentage I’m viewing it at. For me it’s usually 16%, so I resize to 16% bringing it to 100%. ( I hope that made sense!) Once you’ve done this, minimize for later use.

Next go to the bottom template layer and go to selections, select all, then float, selections defloat. Don’t forget to go to selections, none then delete the template layer. Repeat this process for the rest of the template.

Open your photo, do any cleaning up of your photo that you like. For instance I usually go to adjust, remove digital camera noise and just use the default setting. This usually softens the picture a bit and gives it a pretty glow. Now resize it and put it behind your frame layer. Using your magic wand tool, click inside the frame and go to selections, modify expand by 4. Go to selections, invert then on the picture layer, hit the delete key. Now go to selections, none.

Open the glitter border, and then copy and paste as a new layer. Move it below the frame clusters. Adjust it so that its sits to the left of the cluster a bit.

Now open the paper bell, resize it then copy and paste as a new layer. Move it to the upper right hand corner of the page. Add the peppermint candy ornaments on either side at an angle. Then add a flower of choice after resizing to the top of the bell, where everything meets.

Next open two flowers of your choosing, resize them then copy and paste in a cluster at the upper right hand corner of the frame cluster. Arrange how you like.

Your going to use your glitter border again, move it 90 degree’s so its horizontal. Copy and paste as a new layer, moving it towards the bottom of the page. Add a button of your choosing to where the two borders intersect.

Add any text you like then save!

Your all done and congrats you’ve just made a page layout!

Thanks for trying my tutorial.

Feed Jake PTU

This tutorial was written on September 28, 2009 by Shani aka Wicked Princess. The concept of the tag is mine and mine alone. Any resemblance to any other tag/tut is pure coincidence. This was written for those with working knowledge of PSP.
Supplies Needed:

++Paint Shop Pro ( I used 10 but any version should work)


++Scrap kit by KiKeka Kits called Feed Jake can be purchased HERE

++Template 26 by Horseplay’s Pasture can be found ++Template 41 by Horseplays Pastures can be found HERE

++ Picture of choice or tubes of your choosing. I chose to use three pictures supplied by Gina. **Note there ARE tubes in the kit.

++Plug ins:
-Eye Candy 4000 Gradient glow

++font and mask of choice

**NOTES:
-Add Drop shadow of choice as you go
-You can merger layers as you want to make things easier for yourself.

Open the template in PSP, using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original.

Open several papers of choice, resizing as needed. For example, when I look at the blue bar where it tells me what I’ve opened (say like paper 2) it tells me what percentage I’m viewing it at. For me it’s usually 16%, so I resize to 16% bringing it to 100%. ( I hope that made sense!) Once you’ve done this, minimize for later use.

Next go to the bottom template layer and go to selections, select all, then float, selections defloat. Add a gradient glow of your choice. Don’t forget to go to selections, none then delete the template layer. Repeat this for the remainder of the template. *Note I removed the doodle on the upper right hand side. You won’t need this.

Go to your large rectangle layer. Duplicate it twice. Select the bottom rectangle and using your pick tool, angle it to the left where you like it. On the second layer, Angle it the opposite direction. It should now look like a few fanned out cards.

Add a new raster layer and send it to the bottom. Flood fill with your choice of paper. Add your mask of choice and merge the group.

Now open the wire fencing of your choice. Resize then copy and paste as a new layer, moving it above the mask layer.

Then open the wooden fence element. Resize as needed and copy and paste as a new layer above the wire fencing. Adjust as needed.

Take your first photo, resize it then copy and paste as a new layer. On the smaller rectangle layer, go to selections, select all, selections, float then defloat. Now do selections, invert. On the picture layer, hit the delete key. Delete the rectangle layer. Add a gradient glow of your choice. Add the collar of choice to the bottom of the photo where you like it.

Now open the grass element. Resize as needed then copy and paste as a new layer towards the bottom of the canvas.

Open and resize your other two pictures. Copy and paste each one into the first and third frame on the left hand side, in the film strip. Use your magic wand tool, click inside the top frame, expand by 5 and hit delete on the picture layer. Repeat this for the other picture. Add the puppy dog and fire hydrant to the other frame openings and repeat the cropping process of before.

Open the flower of choice, resize it then copy and paste as a new layer at the upper right hand corner of your picture. Add a bow of choice to the bottom left hand corner.

Then open the flower sprigs you like, resize then copy and paste as a new layer to the left hand side of the film strip layer. Duplicate it and move one above the other. Adjust as needed. Then add a butterfly of choice to the right hand corner of this frame at the top.

Next add the dog house, doggie bowl and dog food bag to the bottom right hand corner of the tag.

Open the sun , resize it then copy and paste as a new layer in to the upper right hand corner of the tag.

Add any copyrights, credits, and tagger markings.

Save and your done!

Thanks for trying my tutorial

Official Kindergartner-PTU

Official Kindergartner PTU
This tutorial was written on July 24, 2009 by Shani aka Wicked Princess. The concept of the tag is mine and mine alone. Any resemblance to any other tag/tut is pure coincidence. This was written for those with working knowledge of PSP.
Supplies Needed:

++Paint Shop Pro ( I used 10 but any version should work)

++Scrap kit by Baby V Designs called Kindergarten Dayz can be purchased HERE

++Template 9 by me can be found HERE

++ 7 images of choice. I used 7 pictures of my daughter Maelynne.

++Plug ins:

-Eye Candy 4000 Gradient Glow

++Font and mask of choice

Let’s get Started!

**NOTES:
-Add Drop shadow of choice as you go
-You can merger layers as you want to make things easier for yourself.

Open the template in PSP, using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original.

Open several papers of choice, resizing as needed. For example, when I look at the blue bar where it tells me what I’ve opened (say like paper 2) it tells me what percentage I’m viewing it at. For me it’s usually 16%, so I resize to 16% bringing it to 100%. ( I hope that made sense!) Once you’ve done this, minimize for later use.


Next go to the bottom template layer and go to selections, select all, then float, selections defloat. Don’t forget to go to selections, none then delete the template layer. Add a fat gradient glow of your choosing. Repeat this process for the rest of the template.

Add a new raster layer and flood fill with your choice of paper. Add your mask and merge the group.

Open two of the film frames you like. Minimize one of them and start working with the one. Open three of the pictures you want to use. Note: I did the digitial noise removal to soften the pictures. Copy and paste the first picture into the first frame. Resize as needed. Using your magic wand tool, click inside the frame. Go to selections, invert. Go back to the image layer and hit delete on your keyboard. Go to selections, none. Continue this for the other two frames.

minimize this, and repeat the process for the other film frame. When your satisfied, merge the layers. Minimize this one we’ll use them in a second.

Open your main picture and resize it. I did the digital noise removal on this one too. Add a gradient glow you like to this picture. Copy and paste as a new layer and place at an angle on the left side of the canvas.

Next copy and paste your first film frame and move to the bottom. Add the second one and move to the top.

Then add the clip string after resizing to the top of both frames to make it look like its being clipped on by it.

Open the pencil and crayon clip art. Copy and past as new layers and place on the edges of your main picture. Add the mini chalkboard to the top of it.

Choose one of the children clip art and resize. Copy and paste as a new layer to the left of the bottom frame. Add the books and apple to the opposite corner of the top frame.

Add any text that you like, and if you choose to use the images and no tubes, please credit the maker of the kit.

Save and your done! Thank you for trying my tutorial.