Feeling Lucky (FTU)

This tutorial was written on February 16, 2010 Shani aka Wicked Princess. The concept of the tag is mine and mine alone. Any resemblance to any other tag/tut is pure coincidence. This was written for those with working knowledge of PSP.

Supplies Needed:

++Paint Shop Pro ( I used 10 but any version should work)

++Scrap kit Gina of Kikeka kits called Feeling Lucky can be found HERE

++Template 154 by Ali can be found HERE

++Tube of choice or the one I used. I used the posers included in the kit. Please credit the poser maker, Dark Moon’s creation.

++Plug ins:
-Eye Candy 4000 Gradient Glow

++Font and Mask of choice

**NOTES:
-Add Drop shadow of choice as you go
-You can merger layers as you want to make things easier for yourself.

Open the template in PSP, using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original.

Open several papers of choice, resizing as needed. For example, when I look at the blue bar where it tells me what I’ve opened (say like paper 2) it tells me what percentage I’m viewing it at. For me it’s usually 16%, so I resize to 16% bringing it to 100%. ( I hope that made sense!) Once you’ve done this, minimize for later use.

Next go to the bottom template layer and go to selections, select all, then float, selections defloat. Don’t forget to go to selections, none then delete the template layer. Add a gradient glow of your choice. Repeat this process for the rest of the template.

Add a new raster layer and flood fill with your choice of paper. Add your choice of mask and merge group. Move this layer below your template layers.

Now open the clover leaf frame, resize it then copy and paste as a new layer, moving it blow all layers but above the circle layer.

Open the bougainvillea flower, resize it then copy and paste as a new layer. Move it to the upper left portion of the tag. Duplicate it and go to image, mirror.

Then open the horseshoe, hat and mug. Resize then copy and paste as new layers. Arrange them in the left side template rectangle as you like.

Now open the tube of choice, resize it then copy and paste as a new layer. Move to the right side rectangle. Add the pot of gold to the center of the rectangles, above both the clip art layers and poser layer.

Next open the ivy branches, resize then copy and paste as new layer. Move to the left of the canvas. Duplicate it and go to image, mirror.

Open the feeling lucky word art, resize it then copy and paste as a new layer. Move to the bottom of the template layer.

Next open the flower bouquet of your choice. Resize then copy and paste as a new layer. Move to the left side of the tag then duplicate it. Go to image, mirror and adjust as needed.

Then open the butterfly of choice, resize then copy and paste as a new layer. Move to where ever you like in the tag. Duplicate it and do the same.

Now open the tag of choice, resize it then copy and paste as a new layer. Move it to the bottom lower corner of the tag as you like.

Finally add your text, copyrights, license number if needed and tagger markings.

Save and your done!

Red Rover, Red Rover (FTU)

This tutorial was written on February 20, 2010 Shani aka Wicked Princess. The concept of the tag is mine and mine alone. Any resemblance to any other tag/tut is pure coincidence. This was written for those with working knowledge of PSP.

Supplies Needed:

++Paint Shop Pro ( I used 10 but any version should work)

++Scrap kit Gina of Kikeka kits called Red Rover can be found on her blog as a freebie HERE

++Template 155 by Ali can be found HERE

++Tube of choice or the one I used. I used the clip out kiddo’s that come with the kit. If you don’t use any outside tubes, please credit back to the designers blog.

++Plug ins:
-Eye Candy 4000 Gradient Glow

++Font and Mask of choice

**NOTES:
-Add Drop shadow of choice as you go
-You can merger layers as you want to make things easier for yourself.

Open the template in PSP, using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original.

Open several papers of choice, resizing as needed. For example, when I look at the blue bar where it tells me what I’ve opened (say like paper 2) it tells me what percentage I’m viewing it at. For me it’s usually 16%, so I resize to 16% bringing it to 100%. ( I hope that made sense!) Once you’ve done this, minimize for later use.

Next go to the bottom template layer and go to selections, select all, then float, selections defloat. Don’t forget to go to selections, none then delete the template layer. Add a gradient glow of your choice. Repeat this process for the rest of the template.

Add a new raster layer and flood fill with your choice of paper. Add your choice of mask and merge group. Move this layer below your template layers.

Open the blue glitter splat. Resize then copy and paste as a new layer. Move below the frame layer. Duplicate it and go to image, mirror. Adjust as needed. Using your magic wand tool click inside the frame layer. Go to selections modify, expand by 10. Then go to selections, invert. On the splat layers, hit the delete button.

We’re going to create a scene with in the frame.

Then open the tree, resize and copy and paste as a new layer to the right side, under the frame. Erase the parts seen outside of the frame.

Now open up the house, resize it then copy and paste as a new layer. Move to the center bottom of the frame layer. Add the grass to the bottom of the house. Duplicate the grass and move down at the bottom of the rectangle layer.

Copy and paste the fence after resizing below the house layer. Add a bee above the fence.

Next open the ivy, resize it then copy and paste as a new layer. Duplicate it and move one on the left side of the frame layer and the other on the other side.

Open the flower bouquet. Resize as needed then copy and paste as a new layer to the left and bottom of the frame layer. Duplicate it and go to image, mirror.

Then open the bows of choice, resize them then copy and paste as a new layer. Duplicate them and move them accordingly between the circle layers.

Now open the bush, resize it then copy and paste as a new layer to the left and right of the bottom grass layer. Adjust as needed.

Next add the children playing red rover to the bottom above the bush layer. Resize and adjust as needed.

Open the sun, resize it then copy and paste as a new layer. Move it to the upper right of the tag. Add the rainbow and cloud of your choice next to the sun layer. Move them below the layer.

Finally add your text, copyrights, license info and tagger markings. Save and your done!

Tooth Fairy Visit (FTU)

This tutorial was written on February 20, 2010 Shani aka Wicked Princess. The concept of the tag is mine and mine alone. Any resemblance to any other tag/tut is pure coincidence. This was written for those with working knowledge of PSP.

Supplies Needed:

++Paint Shop Pro ( I used 10 but any version should work)

++Scrap kit by Natasha of Sticky Kisses Designs can be found on her blog HERE

++Template 153 by Ali can be found HERE

++Tube of choice or the one I used. I used the work of Tori Beveridge and you can purchase it from HERE

++Plug ins:
-Eye Candy 4000 Gradient Glow

++Font and Mask of choice

**NOTES:
-Add Drop shadow of choice as you go
-You can merger layers as you want to make things easier for yourself.

Open the template in PSP, using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original.

Open several papers of choice, resizing as needed. For example, when I look at the blue bar where it tells me what I’ve opened (say like paper 2) it tells me what percentage I’m viewing it at. For me it’s usually 16%, so I resize to 16% bringing it to 100%. ( I hope that made sense!) Once you’ve done this, minimize for later use.

Next go to the bottom template layer and go to selections, select all, then float, selections defloat. Don’t forget to go to selections, none then delete the template layer. Add a gradient glow of your choice. Repeat this process for the rest of the template.

Add a new raster layer and flood fill with your choice of paper. Add your choice of mask and merge group. Move this layer below your template layers.

Open up the star cluster, resize it then copy and paste as a new layer. Move it below the circle background layer and at the upper right of the canvas. Duplicate it and go to image, flip.

Then open up the flower, resize then copy and paste as a new layer. Move to the upper left of the canvas, below the circle background layer. Duplicate it and move a little bit further down of the other one. Duplicate it one more time and do the same thing.

Now open up the bed, resize it then copy and paste as a new layer. Move below the circle frame layer. Erase the parts of the bed you don’t want seen outside the frame.

Now open up the sheep, resize it then copy and paste as a new layer. Move it to the upper left of the frame layer. Add a moon to the opposite side.

Open the button of your choosing, resize then copy and paste as a new layer. Duplicate it several times and move around the circle layer as you like.

Then open the button with the tooth fairy on it. Resize it then move it to the upper right of the template, where the rectangles are.

Next open your tube of choice, resize it then copy and paste as a new layer. Move it to the center of the circle layer. Adjust as needed.

Add the tooth fairy pillow and move it to the bottom right of the canvas, angle as you like.

Finally add your text, copyright, tagger markings and license info. Save and your done!

Till the moon and the stars (PTU)

This tutorial was written on February 15, 2010 Shani aka Wicked Princess. The concept of the tag is mine and mine alone. Any resemblance to any other tag/tut is pure coincidence. This was written for those with working knowledge of PSP.

Supplies Needed:

++Paint Shop Pro ( I used 10 but any version should work)

++Scrap kit by Julia Designs called Fairytale can be found HERE

++Two tubes of choice, or the ones I used. I used the work of Suzanne Wolcott. You can find her work at HERE

++Font of choice


**NOTES:
-Add Drop shadow of choice as you go
-You can merger layers as you want to make things easier for yourself.

Open a canvas of 600x600 and flood fill with your choice of paper.

Then open the see through flower trail, resize as needed then copy and paste as a new layer to the upper left corner of the canvas. Duplicate it and go to image, mirror then go to image flip. Adjust as needed.

Now open the ruffle frame, resize it then copy and paste as a new layer. Adjust it and move where you like in the center of the canvas. Using your magic wand tool and click in inside the frame. Go to selections, modify and then expand by 10. Add a raster layer, and move below the frame layer. Flood fill with your choice of paper. Go to selections, none.

Open the bling rain, resize it then copy and paste as a new layer. Move it below the frame layer, adjust as needed. Erase the parts you don’t want seen outside the frame layer.

Next open the wooden bridge, resize it then copy and paste as a new layer into the center of the canvas. Your going to adjust it so it looks like the part at the top that is fading out is going into the frame.

Then open up the clouds, the see through ones and resize. Copy and paste as a new layer, move it below the frame layer to the left. Duplicate it and go to image, mirror. Adjust as needed.

Now open the vine, resize then copy and paste as a new layer. Move it into the upper left hand corner of the frame. Adjust as needed. Then duplicate it then go to image, mirror then duplicate it again. Go to image, flip then one more time duplicate and go to image, mirror. Add the toothpick with bow’s and leaves to the upper left hand corner.

Open the swing, resize then copy and paste as a new layer. Move it to the upper left hand corner of the tag.

Then open the ladder frame, resize it then copy and paste as a new layer. Move to the bottom right hand corner. Add a few flowers to it as you like.

I used a tube by Suzanne Wolcott where the girl is riding a rabbit (maybe lol) with a moon behind her. I put that one in the upper right hand corner of the frame.

Now open your other tube, resize it then copy and paste it as a new layer and move where you like it on the bridge.

Finally add your copyrights, license info and tagger markings. Save and your done!

Thanks for trying my tutorial.

Sex Kitten SAC! (FTU)

This tutorial was written on February 11, 2010 Shani aka Wicked Princess. The concept of the tag is mine and mine alone. Any resemblance to any other tag/tut is pure coincidence. This was written for those with working knowledge of PSP.

Supplies Needed:

++Paint Shop Pro ( I used 10 but any version should work)

++Scrap kit by Dianna of Digicats and Dogs called Dark Cravings can be found HERE

++Template 54 By Kristin can be found HERE

++Two tubes of choice or the ones I used. I used the artwork of Elias Chatzoudis and you can purchase his work from MPT and you must have a license to use his work.

++Plug ins:
-Eye Candy 4000 Gradient Glow

++Font and Mask of choice

**NOTES:
-Add Drop shadow of choice as you go
-You can merger layers as you want to make things easier for yourself.

Open the template in PSP, using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original.

Open several papers of choice, resizing as needed. For example, when I look at the blue bar where it tells me what I’ve opened (say like paper 2) it tells me what percentage I’m viewing it at. For me it’s usually 16%, so I resize to 16% bringing it to 100%. ( I hope that made sense!) Once you’ve done this, minimize for later use.

Next go to the bottom template layer and go to selections, select all, then float, selections defloat. Don’t forget to go to selections, none then delete the template layer. Add a gradient glow of your choice. Repeat this process for the rest of the template.

Add a new raster layer and flood fill with your choice of paper. Add your choice of mask and merge group. Move this layer below your template layers.

Open the mesh of your choosing, resize then copy and paste as a new layer. Move it below your mask layer. Duplicate it and go to image, flip. Add your same mask to the mesh layers.

Now add the barb wire of your choosing to the top and bottom of the rectangle layer.

Then open the candelabra of your choosing, resize then copy and paste as a new layer. Move it to the upper left hand corner of the canvas and below the circle layer. Duplicate it and go to image, mirror.

Open your first tube of choice, resize and crop as needed. Copy and paste as a new layer, into the circle layer above the background word art. Position it the way you like, then go to selections, select all the selections, float and then defloat. Go to selections, invert and on the tube layer hit the delete key. Go to selections, none.

Next open the flowers of your choosing, resize then copy and paste as a new layer in a trio form to the bottom right hand corner of the canvas. Make sure they are below the circle layer.

Then open the other tube you like, resize it then copy and paste as a new layer to the right of the tag. Position where you like it.

Now open the paddle, resize then copy and paste as a new layer . Move to middle of the canvas on the left hand side.

Next open the cage, resize then copy and paste as a new layer below the paddle. Add a bow of choice to the top of it.

Now open several elements you like, resize and copy and paste in clusters toward the bottom right hand corner of the tag.

Add the heart with horns you like to the top of the canvas.

Finally add your text, copyrights, license number and tagger markings.

Save and your done!

Thank you for trying my tutorial.

Snow in love with you (PTU)

This tutorial was written on February 11, 2010 Shani aka Wicked Princess. The concept of the tag is
mine and mine alone. Any resemblance to any other tag/tut is pure coincidence. This was written for
those with working knowledge of PSP.

Supplies Needed:

++Paint Shop Pro ( I used 10 but any version should work)

++Scrap kit by Crazed's Creations called Snow In Love can be purchased from HERE

++Template 121 By Ali can be found HERE

++2 Tubes of choice, or the ones I used. I used the artwork of Elias Chatzoudis and you can purchase his work from MPT You must have a valid license in order to use his work.


++Font and Mask of choice.


**NOTES:
-Add Drop shadow of choice as you go
-You can merger layers as you want to make things easier for yourself.

Open the template in PSP, using your shortcut keys on your keyboard (SHIFT+D) duplicate the template
as a new image. Close the original.

Open several papers of choice, resizing as needed. For example, when I look at the blue bar where it tells me
what I’ve opened (say like paper 2) it tells me what percentage I’m viewing it at. For me it’s usually 16%, so I
resize to 16% bringing it to 100%. ( I hope that made sense!) Once you’ve done this, minimize for later use.

Next go to the bottom template layer and go to selections, select all, then float, selections defloat. Don’t forget
to go to selections, none then delete the template layer. Add a gradient glow of your choice. Repeat this process for the rest of the template.

Add a new raster layer and flood fill with your choice of paper. Add your choice of mask and merge group. Move this layer below your template layers.

Next open the doodle bead swirl of your choosing. Resize then copy and paste as a new layer to the upper left of the canvas. Move below the template layers. Duplicate it and go to image, mirror then image, flip.

Now open the snow drift you like, resize and crop as needed. Copy and paste as a new layer and move below one of the frame layers. Adjust as needed. Duplicate it and move it below the other frame layer.

Then open the tubes of your choosing. Resize as needed. Copy and paste as a new layer and move under one of your frames. Now I chose to make the tubes look like they were popping out of the frame. To do this, duplicate your tube. Move one above the frame layer. Use your magic wand tool and click inside the frame. Go to selections, modify, expand by 3. On the tube layer below the frame, hit the delete key. Go to selections then none. On the tube layer above the frame erase the parts you don’t want seen outside the frame. Repeat this process for the other tube.

Open the heart beads. Resize and crop as needed. Copy and paste as a new layer and move just above the frame layers. Position them so they are at the bottom of the frame. Duplicate it and move it over to the opposite frame.


Next open the rose with long stems you like. Resize then copy and paste as a new layer. Move one below the top tube layer at the top of it. Move and position as needed. Duplicate it and go to image, mirror. Move this one below the other tube layer. Again position as needed.

Now open the heart charm, resize it then copy and paste as a new layer. Move to the top right hand corner of the upper frame. Add a dove to the top of it.

Then open the bow you like. Resize it and copy and paste as a new layer. Duplicate it several times and move them in between the snowflake layers around the top half of the circle.

Open the broken heart element. Resize then copy and paste as a new layer. Duplicate it several times then move in between the snowflake layers on the bottom part of the circle.

Now open the tree, resize then copy and paste as a new layer. Add a candy kiss to the right bottom large snowflake.

Add flower of choice to the top frames, bottom left hand corner.

Open the flower you like, resize it then copy and paste as a new layer. Duplicate it a few times and move them all around the tag as you like.

Finally add your text, copyrights, license info and tagger markings.

Save and your done!

Thanks for trying my tutorial!