Out of my face SAC PTU

**PLEASE NOTE, WHEN YOU CLICKED ON THE WARNING BEFORE LOGGING TO MY BLOG, YOU ACCEPT THAT THERE IS SOME ADULT CONTENT ON THIS BLOG. THE FOLLOWING TAG DOES HAVE STRONG LANGUAGE AND SOME CLEAVAGE. IF YOU ARE EASILY OFFENDED PLEASE CLOSE OUT NOW.**

SCROLL DOWN FOR TAG AND TUT

This tutorial was written on February 20, 2010 Shani aka Wicked Princess. The concept of the tag is mine and mine alone. Any resemblance to any other tag/tut is pure coincidence. This was written for those with working knowledge of PSP.

Supplies Needed:

++Paint Shop Pro ( I used 10 but any version should work)

++Scrap kit called Wicked Princess-The kit by me which can be purchased from HERE

++Template 329 by Missy by can be found HERE

++ 3 tubes of choice or the ones I used. I used the work of Elias Chatzoudis. You must have a valid license in order to use his work and you can purchase it from HERE

++Plug ins:

-Eye Candy 4000 Gradient Glow

-Penta jeans

-Penta dot and cross

++Font of choice

**NOTES:

-Add Drop shadow of choice as you go

-You can merger layers as you want to make things easier for yourself.

Open the template in PSP, using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original.

Open several papers of choice, resizing as needed. For example, when I look at the blue bar where it tells me what I’ve opened (say like paper 2) it tells me what percentage I’m viewing it at. For me it’s usually 16%, so I resize to 16% bringing it to 100%. ( I hope that made sense!) Once you’ve done this, minimize for later use.

Next go to the bottom template layer and go to selections, select all, then float, selections defloat. Don’t forget to go to selections, none then delete the template layer. Add the gradient glow of your choosing. Repeat this process for the rest of the template. NOTE add your gradient glow to the two outside circles.

Then open the spider web, resize it then copy and paste as a new layer. Move it below all the circle layers in the upper left hand corner of the tag.

Open two of your tubes, crop and resize. Copy and paste the first one as a new layer, moving it over to the left hand circle layer at the bottom. Duplicate the tube, go to adjust, blur, guassin blur at the setting of 3.00. While still active on this layer change your blend mode (above your layers palette) to overlay. Now merge down. Merging down just merges it down one layer. Nowyou’re your plug in, Penta>Jeans on the setting you like. Change the opacity to 75.Adjust the tube with in the circle layer the way you like it. Then go to the circle layer and go to selections, select all, selections, float then selections, defloat. Go to selections, invert. Go back to the tube layer, and hit the delete key. Then go to selections, none.

Repeat this for the other tube and other circle layer.

Now open the glitter splats. Resize then copy and paste as a new layer towards the top right of the tag. Move it below the top circle glitter layer. Duplicate it and go to image, mirror then image, flip.

Then open your last tube, resize and crop as needed. Copy and paste the first one as a new layer, moving it over to the center circle layer. Duplicate the tube, go to adjust, blur, guassin blur at the setting of 3.00. While still active on this layer change your blend mode (above your layers palette) to overlay. Now merge down. Merging down just merges it down one layer. Now you’re your plug in, Penta>dots and cross on the setting you like. Change the opacity to 75. Adjust the tube with in the circle layer the way you like it. Then go to the circle layer and go to selections, select all, selections, float then selections, defloat. Go to selections, invert.

Now open the steel spikes, resize then copy and paste as a new layer. Adjust it as needed.

Next open the castle , resize it then copy and paste as a new layer. Move it to the bottom center of the tag. Adjust as needed. Add the voodoo doll after resizing to the upper right of it.

Open the candeles with roses, resize then copy and paste as a new layer, moving it to the right of the castle. Add the bauganvilla flower below this layer to the right of it. Along with the sachet bag.

Then open the devil horns frame, resize then copy and paste to the left of the castle. Move it below the castle layer.

Add the winged hearts just low that but above the castle. Angle it the way you like. Add the blood flower to the left of that.

Open the silver cross, resize then copy and paste as a new layer over the web layer. Adjust as needed. Add the butterfly to the upper left corner.

Open the skull with the crown, resize it then copy and paste as a new layer. Angle it and move to over by the web.

Then open the crown, resize then copy and paste as a new layer. Move it and angle it so it sits sideways on the circle.

Add two screws on the edges of the circle layers.

Finally add your text, copyrights and tagger markings. Save and your done!

Thanks for trying my tutorial.

Heartbreaker PTU

This tutorial was written on February 18, 2010 Shani aka Wicked Princess. The concept of the tag is mine and mine alone. Any resemblance to any other tag/tut is pure coincidence. This was written for those with working knowledge of PSP.

Supplies Needed:

++Paint Shop Pro ( I used 10 but any version should work)

++Scrap kit Forever Friends by me which can be purchased from HERE

++Template 176 by Ali can be found HERE

++Tube of choice or the one I used. I used the work of Keith Garvey. You must have a valid license in order to use his work and you can purchase it from MPT

++Plug ins:
-Eye Candy 4000 Gradient Glow

++Font and mask of choice

**NOTES:
-Add Drop shadow of choice as you go
-You can merger layers as you want to make things easier for yourself.

Open the template in PSP, using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original.

Open several papers of choice, resizing as needed. For example, when I look at the blue bar where it tells me what I’ve opened (say like paper 2) it tells me what percentage I’m viewing it at. For me it’s usually 16%, so I resize to 16% bringing it to 100%. ( I hope that made sense!) Once you’ve done this, minimize for later use.

Next go to the bottom template layer and go to selections, select all, then float, selections defloat. Don’t forget to go to selections, none then delete the template layer. Add the gradient glow of your choosing. Repeat this process for the rest of the template. NOTE on the right side heart, I angled it a bit and moved it over to better fit my tube.

Add a new raster layer and flood fill with your choice of paper. Add your mask of choice, merge group and move this layer to below the template layers.

Open the rose cluster, resize then copy and paste as a new layer to the upper left of the tag. Move it below the heart layers, but above the large rectangle layer on the bottom. Duplicate it and go to image, mirror. Then duplicate it once more, go to image, flip. One more duplication then go to image, mirror.

Then open the flower clip, resize then copy and paste as a new layer. Move to the left between the two rose clusters. Duplicate it then go to image, mirror.

Next open your tube of choice. Copy and paste it as a new layer and duplicate it four times. Close off all but one. BTW you want these above the heart layers. Adjust and resize to a smaller size. Move one over the top of the heart on top. Go to the heart layer, go to selections, select all then selections, defloat. Now go to selections, modify and contract. Contract to what you wan it to be then go to selections, invert. On the tube layer, hit the delete key. Go to selections, none. Now with the remaining two tubes, do the same thing, putting which ever parts of the tube you want in the hearts.

On the last tube, resize it then move it so its below the small rectangle layer. Place it in the center of the canvas as much as you can.

Open the boom box, resize it then copy and paste as a new layer. Move it to below the tube layer, angling it to the right and also make sure its on the right.

Then open the rainbow, resizing then copy and paste it as a new layer angling to the left. Move it below the tube layer and adjust it as you like.

Now open the butterfly brad and the small blossom. Resize them then copy and paste as new layers where you like around the tag. Duplicate them and move where ever else you like.

Finally add your text, copyrights, license info and tagger markings.

Save and your done! Thanks for trying my tutorial.

Come Over Sometime PTU

This tutorial was written on February 17, 2010 Shani aka Wicked Princess. The concept of the tag is mine and mine alone. Any resemblance to any other tag/tut is pure coincidence. This was written for those with working knowledge of PSP.

Supplies Needed:

++Paint Shop Pro ( I used 10 but any version should work)

++Scrap kit Enchanted Grace which can be purchased from any of these stores:









++Template 94 by Ali can be found HERE

++Tube of choice or the one I used. I used the tube that is included in the kit. If you choose to use it please credit Lisa and her blog is HERE

++Font and mask of choice

**NOTES:
-Add Drop shadow of choice as you go
-You can merger layers as you want to make things easier for yourself.

Open the template in PSP, using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original.

Open several papers of choice, resizing as needed. For example, when I look at the blue bar where it tells me what I’ve opened (say like paper 2) it tells me what percentage I’m viewing it at. For me it’s usually 16%, so I resize to 16% bringing it to 100%. ( I hope that made sense!) Once you’ve done this, minimize for later use.

Next go to the bottom template layer and go to selections, select all, then float, selections defloat. Don’t forget to go to selections, none then delete the template layer. Repeat this process for the rest of the template

Add a new raster layer and flood fill with your choice of paper. Add your mask of choice, merge group and move this layer to below the template layers.

Then open the fan, resize and copy and paste as a new layer. Move it below the frame layer in the left frame. Adjust it so its more towards the center of the frame. Duplicate it and go to image, mirror. Adjust as needed.

Next open the candelabra. Resize then copy and paste as a new layer. Move it to the right side of the frame towards the outer part. Add the piano next, towards the bottom of the frame.

Now open the gem ribbon, resize it then copy and paste as a new layer at the top of the frame. Adjust it so it looks like its hanging over.

Open the couch, resize it then copy and paste into the center of the “room”. Add a callalily bouquet behind it.

Then open your tube of choice, resize it then copy and paste as a new layer off to the left of the couch a bit. Behind it add the sachet bag. In front of it add the sachet bag.

Now open the pillow, resize it then copy and paste as a new layer. Move it so it looks like its sitting on the couch.

Next open the drapery, resize it then copy and paste as a new layer. Move it to the left of the frame and adjust as needed.

Open the rose cluster. Resize it then copy and paste as a new layer. Move it to the upper left corner of the frame. Duplicate it and go to image, mirror.

Add the clock to the center of the “room” towards the top.

Finally add your text, copyrights any necessary licensing info and tagger markings.

Save and your done!

Thanks for trying my tutorial.

Big Rockstars PTU

This tutorial was written on February 17, 2010 Shani aka Wicked Princess. The concept of the tag is mine and mine alone. Any resemblance to any other tag/tut is pure coincidence. This was written for those with working knowledge of PSP.

Supplies Needed:

++Paint Shop Pro ( I used 10 but any version should work)

++Scrap kit Rockstar by Crazed’s creations which can be purchased from HERE

++Template 132 by Ali can be found HERE

++Tube of choice or the one I used. I used the artwork of Scott Blair. His work can be purchased from HERE

++Font and mask of choice

**NOTES:
-Add Drop shadow of choice as you go
-You can merger layers as you want to make things easier for yourself.

Open the template in PSP, using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original.

Open several papers of choice, resizing as needed. For example, when I look at the blue bar where it tells me what I’ve opened (say like paper 2) it tells me what percentage I’m viewing it at. For me it’s usually 16%, so I resize to 16% bringing it to 100%. ( I hope that made sense!) Once you’ve done this, minimize for later use.

Next go to the bottom template layer and go to selections, select all, then float, selections defloat. Don’t forget to go to selections, none then delete the template layer. Repeat this process for the rest of the template

Add a new raster layer and flood fill with your choice of paper. Add your mask of choice, merge group and move this layer to below the template layers.


Then open the stage, resize and copy and paste as a new layer towards the top of the canvas. Move below the bottom template layer.

Now open two of the guitars you like. Resize, copy and paste as new layers. Arrange them to the upper right of the canvas, angling as you like.

Next open the beaded twirl you like, resize then copy and paste as a new layer. Move to the bottom, just above the mask layer. You want it to be at the bottom left. Duplicate it and go to image, mirror then image, flip. Adjust as needed.

Now open the speaker and amp. Resize then copy and paste as a new layer to the right side of the canvas. Angle as you like and adjust.

Open the disco ball. Resize then copy and paste as a new layer to the upper left of the tag. Add the microphone to the center of the left hand rectangle.

Then open your tube of choice, resize then copy and paste as a new layer. Move it above the star frame layer. Duplicate it and move one layer below the frame. On the top tube layer, erase the parts of the tube you don’t want seen outside the frame. On the bottom layer erase the excess also.

Next open the drum set. Resize then copy and paste as a new layer. Move it to the left hand rectangle layer. Adjust as needed. Add the skull and crossbones to the center of the big drum. Angle it as you like.

Now open the tag you like, resize then copy and paste as a new layer. Make it look like its hooked around the star frame layer.

Add your text, copyrights, license info and tagger markings.

Save and your done!

Thanks for trying my tutorial.

You Are Beautiful PTU

This tutorial was written on February 17, 2010 Shani aka Wicked Princess. The concept of the tag is mine and mine alone. Any resemblance to any other tag/tut is pure coincidence. This was written for those with working knowledge of PSP.

Supplies Needed:

++Paint Shop Pro ( I used 10 but any version should work)

++Scrap kit My valentine by Designs by Tishia can be purchased from HERE

++Template 63 by Toxic Desirez can be found HERE

++Tube of choice or the one I used. I used the artwork of Leigh Young. She is no longer with MPT so please visit her website to find out where to purchase her work. Her site HERE

++Font and mask of choice

**NOTES:
-Add Drop shadow of choice as you go
-You can merger layers as you want to make things easier for yourself.

Open the template in PSP, using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original.

Open several papers of choice, resizing as needed. For example, when I look at the blue bar where it tells me what I’ve opened (say like paper 2) it tells me what percentage I’m viewing it at. For me it’s usually 16%, so I resize to 16% bringing it to 100%. ( I hope that made sense!) Once you’ve done this, minimize for later use.

Next go to the bottom template layer and go to selections, select all, then float, selections defloat. Don’t forget to go to selections, none then delete the template layer. Repeat this process for the rest of the template. NOTE: I deleted the word art layer.


Add a new raster layer and flood fill with your choice of paper. Add your mask of choice, merge group and move this layer to below the template layers.

Then open the glitter heart, resize it then copy and paste as a new layer. Move it below the template layers, but above the large scalloped layer. Adjust as needed.

Now open the tied ribbon element. Resize then copy and paste as a new layer. Move at an angle to the right under the frame layer. Erase the parts outside of the frame you don’t want showing.

Open your tube of your choice, resize it then copy and paste as a new layer to the left of the tag.

Open the rose of your choice. Resize then copy and paste as a new layer to the right side of the frame towards the top. Duplicate it several times and space it out on the side. Add the quilted heart you like in between the roses.

Add several roses to the bottom of the frame, spaced out as you like.

Finally add your text, copyrights and license info. Save and your done!

Thanks for trying my tutorial.

No Matter What - PTU

**This kit was made for Thanna's daughter who lives with Alopecia. To find out more, vist the website NAAF.** Look at the end for another version of the tag.




This tutorial was written on February 17, 2010 Shani aka Wicked Princess. The concept of the tag is mine and mine alone. Any resemblance to any other tag/tut is pure coincidence. This was written for those with working knowledge of PSP.

Supplies Needed:

++Paint Shop Pro ( I used 10 but any version should work)

++Scrap kit KMA Designs called No Matter What I Love you and it can be purchased HERE

++Template 124 by Ali can be found HERE

++Tube of choice or the one I used. I used the poser that come with the kit. If you don’t use any outside tubes, please credit back to maker of the tube, MEDI

++Plug ins:
-Eye Candy 4000 Gradient Glow

++Font

**NOTES:
-Add Drop shadow of choice as you go
-You can merger layers as you want to make things easier for yourself.

Open the template in PSP, using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original.

Open several papers of choice, resizing as needed. For example, when I look at the blue bar where it tells me what I’ve opened (say like paper 2) it tells me what percentage I’m viewing it at. For me it’s usually 16%, so I resize to 16% bringing it to 100%. ( I hope that made sense!) Once you’ve done this, minimize for later use.

Next go to the bottom template layer and go to selections, select all, then float, selections defloat. Don’t forget to go to selections, none then delete the template layer. Add a gradient glow of your choice. Repeat this process for the rest of the template.

Now open the ivy, resize as needed then copy and paste as a new layer below the first template layer. Adjust it where you like it. Duplicate it and go to image, mirror. Duplicate it again and go to image flip. Once more duplicate it and go to image, mirror.

Then open the rose of choice, resize it then copy and paste as a new layer. Move it to the right side of the tag, below the circle template layer. Arrange it so its between the ivy. Duplicate it and go to image, mirror.

Open the rainbow, resize it then copy and paste as a new layer. Move it to the upper left corner of the tag. Arrange as you like it.

Next open the rose vine, resize it then copy and paste as a new layer. Move it below the circle template layer. Duplicate it and go to image, mirror. Duplicate it then go to image, flip. Duplicate one more time and go to image, mirror.

Now open the tube of choice. Resize it then copy and paste as a new layer. Move it below the small circle layers. Add the closed rose buds of your choosing at an angle below the tube layer. Make sure that you keep the watermark for the tube in tact if you choose to use the one from the kit.

Then open the sun layer. Resize it then copy and paste as a new layer. Move it below the circle’s layer also below the tube layer.

Open the fuchsia of your choosing. Resize it then copy and paste as a new layer. Move it to the top of the small circle layer. Add the other two to the other circles.

Finally add your text, copyrights and necessary license numbers. Add your tagger markings, save and your done!

Thanks for trying my tutorial.