Sweet PTU

This tutorial was written on February 22, 2010 Shani aka Wicked Princess. The concept of the tag is mine and mine alone. Any resemblance to any other tag/tut is pure coincidence. This was written for those with working knowledge of PSP.

Supplies Needed:

++Paint Shop Pro ( I used 10 but any version should work)

++Scrap kit Sweet by Designs by Tishia can be purchased from HERE

++Template 33 by Scraps of Enchantment can be found HERE

++Tube of choice or the one I used. I used the artwork Suzanne Wolcott. You must have a valid license in order to use her work. You can purchase her work from HERE

++Font

++Plug ins:
-Muera Meister Copies

**NOTES:
-Add Drop shadow of choice as you go
-You can merger layers as you want to make things easier for yourself.

Open the template in PSP, using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original.

Open several papers of choice, resizing as needed. For example, when I look at the blue bar where it tells me what I’ve opened (say like paper 2) it tells me what percentage I’m viewing it at. For me it’s usually 16%, so I resize to 16% bringing it to 100%. ( I hope that made sense!) Once you’ve done this, minimize for later use.

Next go to the bottom template layer and go to selections, select all, then float, selections defloat. Don’t forget to go to selections, none then delete the template layer. Repeat this process for the rest of the template.

Open the bottle cap of your choice. Resize it then copy and paste as a new layer. Use your plug in muera meister copies on the encircle option. Set it at the setting you like. I believe I used 10 with the setting at 70. Move this layer below all the rectangle layers.

Then open another bottle cap. Resize then copy and paste as a new layer. Move it to the upper left of the ones you did on the encircle option. Place it so it overlaps them a bit. Duplicate it and go to image, mirror. Then duplicate it again and go to image, flip. Duplicate once more and go to image, mirror.

Next open the clip of choice, resize it then copy and paste as a new layer. Move it below the top scalloped layer on the right.

Now open your tube of choice, resize it then copy and paste as a new layer. Move into the center of the canvas. Add the eyelet ribbon to the bottom of the rectangles.

Open two of the flowers of your choosing, resize them then copy and paste as new layers. Arrange so one is overlapping the other. Merge down then duplicate it. Move one to the upper left of the tag then the lower right.

Then open your tag of choice, resize then copy and paste as a new layer. Open the button of choice, and add to the end of the tag.

Add your word art or text of your choosing.

Don’t forget your copyrights, license info and tagger markings.

Thanks for trying my tutorial!

Welcome to Paradise PTU

This tutorial was written on February 22, 2010 Shani aka Wicked Princess. The concept of the tag is mine and mine alone. Any resemblance to any other tag/tut is pure coincidence. This was written for those with working knowledge of PSP.

Supplies Needed:

++Paint Shop Pro ( I used 10 but any version should work)

++Scrap kit called Acid Rock by me which can be purchased from HERE

++Template 101 by Yvette can be found HERE

++ Tube of choice, or the one I used. I used the work of Joel Adams. You can purchase his art from HERE You must have a valid license to use his work.

++Plug ins:
-Eye Candy 4000 Gradient Glow
-Penta dot and cross

++Font and mask of choice

**NOTES:
-Add Drop shadow of choice as you go
-You can merger layers as you want to make things easier for yourself.

Open the template in PSP, using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original.

Open several papers of choice, resizing as needed. For example, when I look at the blue bar where it tells me what I’ve opened (say like paper 2) it tells me what percentage I’m viewing it at. For me it’s usually 16%, so I resize to 16% bringing it to 100%. ( I hope that made sense!) Once you’ve done this, minimize for later use.

Next go to the bottom template layer and go to selections, select all, then float, selections defloat. Don’t forget to go to selections, none then delete the template layer. Add the gradient glow of your choosing. Repeat this process for the rest of the template.

Add a new raster layer, flood fill with your choice of paper and move to the bottom of the layer palette. Add your choice of mask and merge group.

Then open the rose vine, resize it then copy and paste as a new layer. Rotate it so that it’s up right. Move it below all the layers but above the circle template layer.

Next open the star trail, add a gradient glow to it. Resize then copy and paste as a new layer. Move it to the right of the canvas and make sure it’s just above the circle layer also.

Now open the guitar of your choosing. Resize then copy and paste as a new layer. Angle it the way you like it and move it to the upper right of the tag, just above the star layer.

Open the button frame, resize it then copy and paste as a new layer. Move it at an angle below the rectangle layers. Using your magic wand tool, click inside the frame. Go to selections, modify, expand and add a new layer. Flood fill with your choice of paper. Go to selections, none. Move this layer below the frame layer.

Next open the flame, resize it then copy and paste as a new layer. Move it to the left a bit of the rectangle layers. Make sure this is at the top of the layers Angle it to the left a bit, then duplicate it and go to image, mirror. Adjust as needed.

Then open the microphone and cassette. Resize them then copy and paste as a new layer. Move it to the left of the tag, place them overlapping where you like them.

Now open the speaker. Resize then copy and paste as a new layer to the left of the tag. Angle it just a bit. Add the drum set to the left of that just a bit.

Add the skull and crossbones after resizing to the upper right hand corner of the rectangles.

Open the ball and change. Resize it then copy and paste as a new layer. Move it to the bottom left of the rectangles.

Next open your tube of choice. Resize it as needed then copy and paste as a new layer. Move it into the center of the tag where you like. Duplicate it then on the top layer go to blur, guassin blur and change the blur to 3.00. Change the blend mode on the layer’s palette to overlay. Merge down. Now dulicate it again and on the bottom layer use your plug in, penta dot and cross on whatever setting you like. On the top tube layer, change your opacity to 50.

Now open your winged tag. Resize and add your glow of choice. Copy and paste as a new layer. Move it to the bottom of the tag, centering as you like it.

Add your text, copyrights, license info and tagger markings. Save and your done!

Thanks for trying my tutorial!

Pardon the dust!

Well I figured it was time to go back and clean up the blog. After a year of tut's and designing, it got a bit messy in here! lol I'm double checking links, updating as needed and removing old defunct tuts where I can't find the designer because the store closed or they moved, YOu will see some things moved around, please bare with me!

I am also taking the time to list the tuts that are staying to the Tut Stop forum for easier find! Check it out if you haven't already :)

THanks everyone as always for the support and love!

♥ Shani

Irish Blessings PTU

This tutorial was written on February 21, 2010 Shani aka Wicked Princess. The concept of the tag is mine and mine alone. Any resemblance to any other tag/tut is pure coincidence. This was written for those with working knowledge of PSP.

Supplies Needed:

++Paint Shop Pro ( I used 10 but any version should work)

++Scrap kit Just My Luck by Designs by Tishia can be purchased from HERE

++Template 101 by Ali can be found HERE

++Tube of choice or the one I used. I used the artwork Suzanne Wolcott. You must have a valid license in order to use her work. You can purchase her work from HERE

++Font and mask of choice

++Plug ins:
-Eye Candy 4000 Gradient Glow

**NOTES:
-Add Drop shadow of choice as you go
-You can merger layers as you want to make things easier for yourself.

Open the template in PSP, using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original.

Open several papers of choice, resizing as needed. For example, when I look at the blue bar where it tells me what I’ve opened (say like paper 2) it tells me what percentage I’m viewing it at. For me it’s usually 16%, so I resize to 16% bringing it to 100%. ( I hope that made sense!) Once you’ve done this, minimize for later use.

Next go to the bottom template layer and go to selections, select all, then float, selections defloat. Don’t forget to go to selections, none then delete the template layer. Add a gradient glow of your choosing. Repeat this process for the rest of the template.

Then open the clover border. Resize and free rotate to the left. Copy and paste as a new layer, moving it below the rectangles layers.

Now open the tag, resize then copy and paste as a new layer at the bottom of the frame layer, off to the left a bit. Add the criss cross stitching so it overlaps the tag and the frame slightly. Giving it that look like its been stitched on there.

Open the large toadstool, reseize it then copy and paste as a new layer. Move it to the left of the tag. Add two of the smaller ones, one in front and one behind it.

Then open the bear, resize then copy and paste as a new layer to the top of the large toadstool. Make it look like he is sitting on top of it.

Pick one of the shamrocks you like, resize it then copy and paste as a new layer to the left of the large toadstool.

Now open two flowers you like, resize then copy and paste as new layers towards the bottom of the toad stools.

Add a bow to one of the ends of rectangles. Then another to the bottom tag.

Add your texts, copyrights, tagger markings and license numbers. Save and your done!

Thanks for trying my tutorial.

Gold Chocolate PTU

This tutorial was written on February 21, 2010 Shani aka Wicked Princess. The concept of the tag is mine and mine alone. Any resemblance to any other tag/tut is pure coincidence. This was written for those with working knowledge of PSP.

Supplies Needed:

++Paint Shop Pro ( I used 10 but any version should work)

++Scrap kit by Natasha of Sticky Kisses Designs called Lucky can be purchased from HERE

++Template 101 by Ali can be found HERE

++Tube of choice or the one I used. I used the work of Leigh Young. When I purchased her work, she was still with MPT, you can go to her website to find out where to get her art now. Leigh Young's Website HERE

++Plug ins:
-Eye Candy 4000 Gradient Glow

++Font and Mask of choice

**NOTES:
-Add Drop shadow of choice as you go
-You can merger layers as you want to make things easier for yourself.

Open the template in PSP, using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original.

Open several papers of choice, resizing as needed. For example, when I look at the blue bar where it tells me what I’ve opened (say like paper 2) it tells me what percentage I’m viewing it at. For me it’s usually 16%, so I resize to 16% bringing it to 100%. ( I hope that made sense!) Once you’ve done this, minimize for later use.

Next go to the bottom template layer and go to selections, select all, then float, selections defloat. Don’t forget to go to selections, none then delete the template layer. Add a gradient glow of your choice. Repeat this process for the rest of the template.

Add a new raster layer and flood fill with your choice of paper. Add your choice of mask and merge group. Move this layer below your template layers.

Then open the shamrock splatter, resize it then copy and paste as a new layer at the top of the canvas. Move it down below the template layers. Duplicate it and go to image, mirror and then image, flip.

Now open the ribbon with hats on it, resize then copy and paste as a new layer. Arrange it to the bottom left of the templates, we’re going to make a square out of it. Also make sure its below the template layers. Duplicate it and go to image, mirror then image, flip.

Open the iron braid, resize it then copy and paste as a new layer. Move it to below the template layers, to the right, at the end of the ribbon. Duplicate it and go to image, mirror then image, flip.

Now open the gold coins, resize it then copy and paste as a new layer. Move it below the large circle layer, arrange it to the upper right of the tag. Add a bow to the top right.

Next open the glitter shamrock paper clip, resize it then copy and paste as a new layer to the upper left of the tag. Move it below the circle layer. Duplicate it and go to image, mirror then image, flip. Add the yellow flower of your choice to the middle of the shamrocks.

Then open the pot of gold with the rainbow. Resize it then copy and paste as a new layer to the left of the tag.

Add your text, copyrights, tagger markings and licensing info.

Save and your done!

Rain Drops PTU

This tutorial was written on February 21, 2010 Shani aka Wicked Princess. The concept of the tag is mine and mine alone. Any resemblance to any other tag/tut is pure coincidence. This was written for those with working knowledge of PSP.

Supplies Needed:

++Paint Shop Pro ( I used 10 but any version should work)

++Scrap kit called Blue Lagoon by Julia Designs can be purchased from http://www.scrappinbratz.com/shoppe/index.php?main_page=product_info&cPath=19_150&products_id=2729

++Template 12 by HippieDaze can be found http://hippiedazetuts.blogspot.com/search/label/Templates

++ Tube of choice or the one I used. I used the artwork of Suzanne Wolcott and it can be purchased www.gorjussart.co.uk

++Plug ins:
-Eye Candy 4000 Gradient Glow

++Font and mask of choice

**NOTES:
-Add Drop shadow of choice as you go
-You can merger layers as you want to make things easier for yourself.

Open the template in PSP, using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original.

Open several papers of choice, resizing as needed. For example, when I look at the blue bar where it tells me what I’ve opened (say like paper 2) it tells me what percentage I’m viewing it at. For me it’s usually 16%, so I resize to 16% bringing it to 100%. ( I hope that made sense!) Once you’ve done this, minimize for later use.

Next go to the bottom template layer and go to selections, select all, then float, selections defloat. Don’t forget to go to selections, none then delete the template layer.. Repeat this process for the rest of the template.

Add a new raster layer and move it to the bottom of the layers palette. Flood fill with your choice of paper. Add your mask of choice and merge group.

Then open the criss cross sticks, resize then copy and paste as a new layer. Move all the way down just above the mask layers.

Open the ivy, resize then copy and paste as a new layer. Move to the right of the square. Duplicate it and go to image mirror.

Next open the rose blossom, resize then copy and paste as a new layer. Move to the bottom of the ivy stem on the right. Duplicate it and go to image, mirror.

Then open the small blue blossom. Resize then copy and paste as a new layer. Move it to where you like on the right side. Duplicate and move it to where you want it on the left side. Do the same with a bow of your choosing.

Now open the heart dangle with bow you like. Copy and paste as a new layer. Move it to the right triangle layer. Duplicate it and go to image, mirror.

Open your tube of choice, resize it then copy and paste as a new layer. Add the gradient glow of your choosing. Center into your canvas.

Finally add your text, copyrights and tagger markings. Save and your done!

Thanks for trying my tutorial.