Rock On PTU

This tutorial was written on August 16, 2009 by Shani aka Wicked Princess. The concept of the tag is mine and mine alone. Any resemblance to any other tag/tut is pure coincidence. This was written for those with working knowledge of PSP.
Supplies Needed:


++Paint Shop Pro ( I used 10 but any version should work)

++Scrap kit by Mellibeans called Rockstar can be purchased HERE

++Template 79 by Kristin can be found HERE

++Three tubes of choice or the ones I used. I used the artwork of Elias Chatzoudis which can be purchased HERE


Let’s get started!

**NOTES:
-Add Drop shadow of choice as you go
-You can merger layers as you want to make things easier for yourself.

Open the template in PSP, using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original.

Open several papers of choice, resizing as needed. For example, when I look at the blue bar where it tells me what I’ve opened (say like paper 2) it tells me what percentage I’m viewing it at. For me it’s usually 16%, so I resize to 16% bringing it to 100%. ( I hope that made sense!) Once you’ve done this, minimize for later use.


Next go to the bottom template layer and go to selections, select all, then float, selections defloat. Don’t forget to go to selections, none then delete the template layer. Repeat this process for the rest of the template.

Open the glitter splatter you like. Copy and paste as a new layer, moving it to the bottom of the layer palette. Move it to the upper right hand side. Duplicate it and go to image, mirror then image flip.

Next open the three tubes of choice. Place in each of the frames as you like. **Note I chose to make them look like they were “jumping” out of the frame. To do this duplicate the tube, move it below the frame. On the top tube layer, use your eraser brush and remove what you don’t want seen above the frame. Go to the bottom tube layer and erase the rest that you don’t want seen, usually towards the bottom.

Open your ribbon of choice, resize then copy and paste as a new layer. Move and angle as you like to the frame on the right hand side. Do this for the middle frame, but up in the upper right hand corner of it.

Choose the two curled ribbons you like. Copy and paste the first one, resizing and adjusting. Move to the bottom part of the frame on the left. Move this below the skull layer from the template. Repeat this for the other two frames.

Add your flower of choice to the corner of the middle frame. Resize it and adjust as needed.


Open to the two guitars, resize and adjust as needed. Copy and paste as new layers to the left of the canvas. Angle the one on the right slightly and add a bow of choice to the middle of them where they connect.

Now open the skull sticker to the upper right hand side of the tag.

Add your text, copyrights, license number and tagger markings.

Save and your done! Thank you for trying my tutorial!

Bad Bitch FTU

Bad Bitch FTU

This tutorial was written on July 3, 2009 by Shani aka Wicked Princess. The concept of the tag is mine and mine alone. Any resemblance to any other tag/tut is pure coincidence. This was written for those with working knowledge of PSP.
Supplies Needed:


++Paint Shop Pro ( I used 10 but any version should work)

++Scrap kit by Stef called Born to Ride can be found on her blog HERE

++Template by Susan aka HippieDaze can be found HERE

++Tube of choice or the one I used. I used the artwork of Ismael Rac, this is a FTU tube available on his site! You can find it HERE

++Plug ins:
-Eye Candy 4000 Gradient Glow

++Font and mask of choice

Let’s get started!

**NOTES:
-Add Drop shadow of choice as you go
-You can merger layers as you want to make things easier for yourself.


Open several papers of choice, resizing as needed. For example, when I look at the blue bar where it tells me what I’ve opened (say like paper 2) it tells me what percentage I’m viewing it at. For me it’s usually 16%, so I resize to 16% bringing it to 100%. ( I hope that made sense!) Once you’ve done this, minimize for later use.


Next go to the bottom template layer and go to selections, select all, then float, selections defloat. Add a gradient glow of your choice on the fat setting. Don’t forget to go to selections, none then delete the template layer. Repeat this process for the rest of the template.


Add a new raster layer and fill with your choice of paper. Add your mask and merge group.


Open the glitter splat element, copy and paste as a new layer, move to just above the mask layer. Duplicate it and go to image, mirror then image, flip.

Open the large black flower, and resize as needed. Copy and paste as a new layer, and move to the left of the top frame layer. Duplicate it and go to image, mirror. Add the large orange one in the center, below the skull layer. All flowers should be below the skull layer.

Add the beaded doodle to the top of the frame, towards the top of the circle.

Add your tube of choice, adjusting and resizing as needed. Move ti to the right of the tag a bit.

Finally add your copyright info, license number if needed, text and tagger markings.

Save and yoru done! Thank you for trying my tutorial.

For those about to rock PTU

For those about to rock PTU

This tutorial was written on August 14, 2009 by Shani aka Wicked Princess. The concept of the tag is mine and mine alone. Any resemblance to any other tag/tut is pure coincidence. This was written for those with working knowledge of PSP.
Supplies Needed:


++Paint Shop Pro ( I used 10 but any version should work)

++Scrap kit by Alyssa called Good Vs. Evil can be purchased HERE

++Template 12 by Wacky Scraps can be found HERE

++Tube of choice or the one I used. I used the artwork of Susan Mcgivergan which can be purchased HERE

++Plug ins:

Eye Candy 4000 Gradient Glow

++Font and Mask of choice

**NOTES:
-Add Drop shadow of choice as you go
-You can merger layers as you want to make things easier for yourself.

Open the template in PSP, using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original.

Open several papers of choice, resizing as needed. For example, when I look at the blue bar where it tells me what I’ve opened (say like paper 2) it tells me what percentage I’m viewing it at. For me it’s usually 16%, so I resize to 16% bringing it to 100%. ( I hope that made sense!) Once you’ve done this, minimize for later use.


Next go to the bottom template layer and go to selections, select all, then float, selections defloat. Don’t forget to go to selections, none then delete the template layer. Add a gradient glow on the fat setting the colors of your choice. Repeat this process for the rest of the template.

Add a new raster layer, and flood fill with your choice of paper. Add your mask and merge group. Send this to the bottom of the layers palette.

Open the glitter splat of choice, resize then copy and paste as a new layer. Move this to just above the mask layer.

Next open the rose with stem of your choice. Copy and paste as a new layer and move below the frame background layer, adjusting and angling to the left slightly. Duplicate it and go to image, mirror.

Open the fencing wire, copy and paste as a new layer. Use your magic wand tool and click inside the circle frame layer. Go to selections, modify expand by 6. Go to selections, invert and hit delete on your keyboard.

Copy and paste your tube , and do the same as above.

Add your cloud of choice to the bottom part of the circle frame. Duplicate it and go to image, mirror.

Open the cupcake you like, resize then copy and paste as a new layer to the right of the template frame. Add two roses you like, duplicating one and moving it side by side. Add the other one to the center of those.

Next add a guitar to the left part of the frame and a bow to the top center.

Add your text, copyrights, license info and tagger markings.

Save and your done!

Thank you for trying my tutorial.

Sugar Overload PTU

Sugar Overload PTU

This tutorial was written on August 14, 2009 by Shani aka Wicked Princess. The concept of the tag is mine and mine alone. Any resemblance to any other tag/tut is pure coincidence. This was written for those with working knowledge of PSP.
Supplies Needed:


++Paint Shop Pro ( I used 10 but any version should work)

++Scrap kit by Susan aka HippieDaze called Sweet Tooth can be purchased HERE

++Template 26 by Susan can be found HERE

++Tube of choice or the one I used. I used the artwork of Elias Chatzoudis which you can purchase
HERE

Let’s Get Started!

**NOTES:
-Add Drop shadow of choice as you go
-You can merger layers as you want to make things easier for yourself.


Open several papers of choice, resizing as needed. For example, when I look at the blue bar where it tells me what I’ve opened (say like paper 2) it tells me what percentage I’m viewing it at. For me it’s usually 16%, so I resize to 16% bringing it to 100%. ( I hope that made sense!) Once you’ve done this, minimize for later use


Next go to the bottom template layer and go to selections, select all, then float, selections defloat. Don’t forget to go to selections, none then delete the template layer. Add a gradient glow of your choice on the store outline layer. Repeat this process for the rest of the template.


Open your tube of choice and copy and paste as a new layer into the center of the canvas. Arrange and adjust as you need to.

Next we’re going to add all the sugar! Start off with the gumball machine and resize it as needed. Copy and paste to the left of the window on the left. Duplicate it then go to image, mirror.

Open the cupcake, ice cream cone and lollipop you like. First resize the lollipop and copy and paste as a new layer towards the top of the template on the left. Duplicate it and go to image, mirror. Repeat this for the ice cream cone, and cupcakes. Make sure your overlapping them a bit. Add a candy of choice to the middle of the lollipop stick.

Choose two more ice cream cones, copy and paste as a new layer. Move to the bottom right of the middle window, angele them slightly and add a candy of your choice to the bottom of the cones.

Next open the sundae of your choice and resize. Copy and paste above the sign on the left. Adjust as needed.

Open the cookie, gum drops and banana split and scatter on the bottom.

Finally add your text, copyright info, license info and tagger markings.

Save and your done!

Thank you for trying my tutorial.

Wickedly Me PTU

Wickedly Me PTU

This tutorial was written on August 14, 2009 by Shani aka Wicked Princess. The concept of the tag is mine and mine alone. Any resemblance to any other tag/tut is pure coincidence. This was written for those with working knowledge of PSP.

Supplies Needed:

++Paint Shop Pro ( I used 10 but any version should work)

++Scrap kit by me called Wonderfully Wicked can be purchased from HERE OR HERE


++Template 12 by Bev @ Horseplays Pasture can be found HERE

++Tube of choice or the one provided in the kit.

++Plug ins:

~Eye Candy 4000 gradient glow

++Font and Mask of choice

Let’s get started!

**NOTES:
-Add Drop shadow of choice as you go
-You can merger layers as you want to make things easier for yourself.


Open several papers of choice, resizing as needed. For example, when I look at the blue bar where it tells me what I’ve opened (say like paper 2) it tells me what percentage I’m viewing it at. For me it’s usually 16%, so I resize to 16% bringing it to 100%. ( I hope that made sense!) Once you’ve done this, minimize for later use.


Next go to the bottom template layer and go to selections, select all, then float, selections defloat. Add a gradient glow of your choice on the fat setting. Don’t forget to go to selections, none then delete the template layer. Repeat this process for the rest of the template.


Add a new raster layer and fill with your choice of paper. Add your mask and merge group.

Next open the note paper you like. Copy and paste as a new layer after resizing. Move this up towards the top right, into the crevice kind of, of the scalloped circle and rectangle. Move this layer below the template layers, just above the left rectangle layer. Add a pin of choice to the paper, at an angle also.

Next open the greenery. Copy and paste as a new layer and move to the layer above the note paper. Duplicate it and go to image, mirror. Move back over towards your original so it looks like they are intertwined. Close of all layers and merge visible. Duplicate it and got to image, mirror. Now open all layers.

Open several flowers of your choosing and resize them. Copy and paste as anew layers, arranging them so they go down the length of the plant. Move and adjust as needed. Add a few to the other side also where you like.

Add several butterflies you like through out the tag, placing where you like.

Open the tube, resize as needed. Copy and paste as a new layer, centering into the center of the frame. Adjust and crop as you need to. Add a doodle you like along with the skull into the center of it at the bottom of the circle frame.

Next open the voo doo doll, and resize. Copy and paste it to the right of the tag on the bottom. Adjust as needed.

Add your text, any copyrights and licensing you may need to add. Tagger markings also!

If you just use my kit, please credit me by putting my blog url on the kit.

Thank you for trying my tutorial!

Rock Freak PTU

Rock Freak PTU

( this kit is in the $2 buck sale at twilight scraps!)

This tutorial was written on August 11, 2009 by Shani aka Wicked Princess. The concept of the tag is mine and mine alone. Any resemblance to any other tag/tut is pure coincidence. This was written for those with working knowledge of PSP.
Supplies Needed:

++Paint Shop Pro ( I used 10 but any version should work)

++Scrap kit by me called Sweet Rock can be purchased from HERE OR HERE

++Template 11 by Nee at Envied and Admired can be found HERE


++Tube of choice or the one I used. I used the artwork of Keith Garvey which can be purchased HERE

++Plug ins:

Eye Candy 4000 Gradient Glow
Tramages Tow the line

+Font of choice

Let’s get Started!

**NOTES:
-Add Drop shadow of choice as you go
-You can merger layers as you want to make things easier for yourself.

Open the template in PSP, using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original.

Open several papers of choice, resizing as needed. For example, when I look at the blue bar where it tells me what I’ve opened (say like paper 2) it tells me what percentage I’m viewing it at. For me it’s usually 16%, so I resize to 16% bringing it to 100%. ( I hope that made sense!) Once you’ve done this, minimize for later use.


Next go to the bottom template layer and go to selections, select all, then float, selections defloat. Add a gradient glow of your choice on the fat setting. Don’t forget to go to selections, none then delete the template layer. Repeat this process for the rest of the template.

Open the glitter doodle you like, resize then copy and paste as a new layer. Angle to the left slightly and move into the upper left hand corner. Move it below the octogan layer. Duplicate it and go to image, mirror. Then duplicate it again an go to image, flip. Duplicate one more time and go to image mirror again.

Next open both guitars. Copy and paste one after resizing it. Angel it so the bottom part of the guitar is facing outwards toward the top right corner. Move it so that it is in that corner. Duplicate it then go to image, mirror, then image flip. Do the same thing for the other guitar.

Add a star of choice, resize it and make it larger a bit into the center of the octagon.

Open your tube of choice, resize it then copy and paste as a new layer into the center of the canvas. Move it to the bottom a bit

Then add your drumset, resizing it as needed. Arrange it and the tube so they are overlapping and centered.

Next open the button you like, resize it then copy and paste as new layers on either side of the octagon.

Open the staple with a star you like, copy and paste as a new layer, and move it to the top left side of the skinny rectangles. Duplicate it and go to image mirror. Repeat this for the bottom ones too.

Finally add your text, copyrights, license info and tagger markings.

Save and your done! Thank you for trying my tutorial!