Paradise PTU

This tutorial was written on April 15, 2010 Shani aka Wicked Princess. The concept of the tag is mine and mine alone. Any resemblance to any other tag/tut is pure coincidence. This was written for those with working knowledge of PSP.

Supplies Needed:

++Paint Shop Pro ( I used 10 but any version should work)

++Scrap kit by Designs by Stina called A touch of paradise can be purchased http://www.scrappinbratz.com/shoppe/index.php?main_page=index&manufacturers_id=63

++Template 101 by Ali at www.designsbyali.blogspot.com

++Tube of choice or the one I used. I used the artwork of Elias Chatzoudis and you can purchase his work from www.mypsptubes.com

++Plug ins:
-Eye Candy 4000 Gradient Glow
Muera Meister Copies
Penta.com dot and cross


++Font and mask of choice


**NOTES:
-Add Drop shadow of choice as you go
-You can merger layers as you want to make things easier for yourself.

Open the template in PSP, using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original.

Open several papers of choice, resizing as needed. For example, when I look at the blue bar where it tells me what I’ve opened (say like paper 2) it tells me what percentage I’m viewing it at. For me it’s usually 16%, so I resize to 16% bringing it to 100%. ( I hope that made sense!) Once you’ve done this, minimize for later use.

Next go to the bottom template layer and go to selections, select all, then float, selections defloat. Don’t forget to go to selections, none then delete the template layer. Repeat this process for the rest of the template. Add a gradient glow of your choosing also.

Open the palm tree, resize then copy and paste as a new layer. Move it to the upper left of the template layer. Move it also to the bottom of the layers palette. Duplicate it and go to image, mirror. Merge down one layer. Duplicate it and go to image, flip. Adjust as needed.

Next open the flower you like, resize it then copy and paste as a new layer. Move it to the upper left of the canvas. Duplicate it and go to image, mirror. Merge down one layer and then duplicate it, go to image, flip. Adjust as needed.

Now open another set of flowers you like, angle it and move to the middle left of the canvas. Duplicate it and move it just a bit down a little more. Merge down one more. Duplicate it and go to image, mirror. Adjust as needed.

Then open the single flower you like. Resize it then copy and paste as a new layer. Use your plug in Muera meister copies and set it on the encircle option. Set the x and y to I believe 60. Move it and adjust as needed.

Open your tube of choice. Resize it then copy and paste as a new layer. Duplicate it and go to image, blur, guassian blur set on 3. Set the layer blend to opacity. Merge down one layer. Using your plug in penta, dot and cross set it to a lighter setting. If you look closely you can barely see what I’ve done. Move this below the frame layer. Adjust it so it’s set to the outer side of the circle. Duplicate it and go to image mirror. Adjust as needed. Now back on the frame layer use your magic wand tool, click inside the frame and go to selections, modify, expand by 6. Go to selections, invert and on your tubes layers, hit the delete key. Remember to go to selections, none.

Next open the word art, resize it then copy and paste as a new layer. Move it below the frame layer.

Open your tube again and copy and paste as a new layer. Make sure it’s above the frame layer, and move it to the center of the frame

Now open the drink of your choosing, resize then copy and paste as a new layer to the left of the frame layer, just above the bottom. Duplicate I and go to image, mirror. Add the flower of your liking to the bottom part of both the drinks. Then paste the coconut drink to the center of those.

Then open two of the butterflies you like and copy and paste them as you like around the tag.

Finally add your text, copyrights, license info and tagger markings. Save and you done! Thanks for trying my tutorial.

You are my Sunshine PTU

This tutorial was written on April 15, 2010 Shani aka Wicked Princess. The concept of the tag is mine and mine alone. Any resemblance to any other tag/tut is pure coincidence. This was written for those with working knowledge of PSP.

Supplies Needed:

++Paint Shop Pro ( I used 10 but any version should work)

++Scrap kit by Designs by Stina called Showers and Flowers can be purchased HERE

++Template You are my sunshine by Loving Miranda Creations can be found HERE

++Tube of choice or the one I used. I used the artwork of Suzanne Wolcott. You can purchase her work from HERE

++Plug ins:
-Eye Candy 4000 Gradient Glow


++Font and mask of choice


**NOTES:
-Add Drop shadow of choice as you go
-You can merger layers as you want to make things easier for yourself.

Open the template in PSP, using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original.

Open several papers of choice, resizing as needed. For example, when I look at the blue bar where it tells me what I’ve opened (say like paper 2) it tells me what percentage I’m viewing it at. For me it’s usually 16%, so I resize to 16% bringing it to 100%. ( I hope that made sense!) Once you’ve done this, minimize for later use.

Next go to the bottom template layer and go to selections, select all, then float, selections defloat. Don’t forget to go to selections, none then delete the template layer. Repeat this process for the rest of the template. Add a gradient glow of your choosing also.

Go to the background layer at the bottom of the layers palette, and flood fill the background layer with your choice of paper.

Open the grass, resize it then copy and paste as a new layer. Move it to the bottom of the layer palette, and just above the mask layer.

Next open the pathway, resize it then copy and paste as a new layer. Move this below the large flower layer. Adjust it so it looks like it’s coming out of the flower.

Now open the flower spray, resize then copy and paste as a new layer above the path way layer. Move to the center where you like them.

Then open the table and chairs resize then copy and paste as a new layer. Move down towards the bottom of the pathway.

Open your tube of choice, resize it then copy and paste it as a new layer so it looks like its sitting on the small rectangle layer. Adjust as needed. I moved mine below the flower center layer so it’s tucked behind it a bit. Add a lady bug to the end of the right side.

Now open the umbrellas, resize then copy and paste two on the sides of the tube layer. Add a bird of your choosing to the right of the tube.

Next open the sunshine resize it then copy and paste as a new layer to the upper right of the tag below the templates layer.

Open the tree of your choosing, open it then copy and paste as a new layer to the bottom left of the tag. Add a bird to the top of it.

Then open the rainbow, resize it then copy and paste as a new layer to the upper left of the tag.

Now open a bee and butterfly of your choosing, copy and paste them to where you like. Add the sunflower of your choosing to opposite sides of the tag.

Finally add your text, copyrights, license number and tagger markings. Save and your done! Thanks for trying my tutorial.

All Katie PTU

This tutorial was written on April 15, 2010 Shani aka Wicked Princess. The concept of the tag is mine and mine alone. Any resemblance to any other tag/tut is pure coincidence. This was written for those with working knowledge of PSP.

Supplies Needed:

++Paint Shop Pro ( I used 10 but any version should work)

++Scrap kit by called All About Attitude by Crazed’s Creations can be found HERE

++Template 117 by Ali can be found HERE

++Tube of choice or the one I used. I used the tubes that were included in the kit by KMA Dezigns

++Plug ins:
-Eye Candy 4000 Gradient Glow
-Muera Meister Copies

++Font and mask of choice


**NOTES:
-Add Drop shadow of choice as you go
-You can merger layers as you want to make things easier for yourself.

Open the template in PSP, using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original.

Open several papers of choice, resizing as needed. For example, when I look at the blue bar where it tells me what I’ve opened (say like paper 2) it tells me what percentage I’m viewing it at. For me it’s usually 16%, so I resize to 16% bringing it to 100%. ( I hope that made sense!) Once you’ve done this, minimize for later use.

Next go to the bottom template layer and go to selections, select all, then float, selections defloat. Don’t forget to go to selections, none then delete the template layer. Repeat this process for the rest of the template. Add a gradient glow of your choosing also.

Go to the background layer at the bottom of the layers palette, and flood fill the background layer with your choice of paper.

Then open the glitter splatter things. Resize then copy and paste as a new layer. Move to just above the mask layer. Open a second one and rotate it and paste where you like it. Duplicate them both and go to image, mirror.

Open the flower of your choosing, resize it then copy and paste as a new layer. Using your plug in muera meister copies, use the encircle option with the shift x and y set to 50. Move just above the splatter layer.

Next open the heart key. Resize then copy and paste as a new layer. Move them above the rectangles on the right. Angle it as you like towards the top. Add the guitar of your choosing towards the bottom end of the rectangles.

Then open the bling rain, resize it then copy and paste as a new layer. Move it below the frame layer. Using your magic wand tool, click inside the frame. Go to selections, modify, expand by 6. Go to selections, invert. On the rain layer hit the delete key. Go to selections, none.

Open your tube of choice, resize then copy and paste as a new layer. Move it below the frame layer, and to the right. Duplicate it and on the top layer, go to adjust, blur and guassian blur of 3. Change the blend mode to overlay. Merge down one layer. Add your other tube of choice to the left side. Due the same thing as you did before wit the blur. Using your magic wand tool, click inside of the frame. Go to selections, modify, expand it by 6. Go to selections, invert. On the tube layers hit the delete key. Go to selections, none.

Now open the next tube. Resize it then copy and paste as a new layer. Move it to the center of the tag. Do the guassin blur trick again to this tube too.


Then open the candle, cell phone, sachet bag, note, shoe, lipstick and butterfly of your choosing. Arrange them like you want, at the bottom left corner.

Open the looped ribbon, resize it then copy and paste as a new layer. Duplicate it and move each one to the upper corners of the frames.

Next open the feather pen, resize it then copy and paste as a new layer to the right of the frame. Open the butterflies you like, resize them then copy and paste as you like through out the tag.

Finally add your text, copyrights and tagger markings. Save and your done!

Thanks for trying my tutorial.

Fairy Welcome PTU

This tutorial was written on April 3, 2010 Shani aka Wicked Princess. The concept of the tag is mine and mine alone. Any resemblance to any other tag/tut is pure coincidence. This was written for those with working knowledge of PSP.

Supplies Needed:

++Paint Shop Pro ( I used 10 but any version should work)

++Scrap kit by called Down at the bottom of the garden by Athena Designs can be purchased HERE


++Template 9 by Alyssa can be found HERE

++Tube of choice or the one I used. I used the work of Cris De Lara which can be purchased from MPT

++Font of choice


**NOTES:
-Add Drop shadow of choice as you go
-You can merger layers as you want to make things easier for yourself.

Open the template in PSP, using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original.

Open several papers of choice, resizing as needed. For example, when I look at the blue bar where it tells me what I’ve opened (say like paper 2) it tells me what percentage I’m viewing it at. For me it’s usually 16%, so I resize to 16% bringing it to 100%. ( I hope that made sense!) Once you’ve done this, minimize for later use.

Next go to the bottom template layer and go to selections, select all, then float, selections defloat. Don’t forget to go to selections, none then delete the template layer. Repeat this process for the rest of the template.

Go to the background layer at the bottom of the layers palette, and flood fill the background layer with your choice of paper.


I closed off all the layers except for the square frame layer, and the background layer. Merge the layers. Open the other two layers back up.

Then open the rock pathway. Resize it then copy and paste as a new layer. Move it below the square background layer. Move it to the left then duplicate it. Go to image, mirror.

Now open the butterfly spray, resize it then copy and paste as a new layer. Move it above the background layer. Move towards the top of it.

Next open the rainbow, resize then copy and paste as a new layer towards the top of the background layer. Adjust as needed.

Open the grass, resize then copy and paste as a new layer. Move it to the bottom of the frame layer.

Then open the mushrooms you like, resize it then copy and paste as a new layer, move it to the left. Add the house to the right.

Now open the swing, resize it then copy and paste as a new layer to the upper left of the frame.

Next open the trio flower, the blue ones, resize it then copy and paste as a new layer to the left on the bottom of the frame.

Then open the twig ladder, resize it then copy and paste as a new layer. Move it to the left of the tag, towards the bottom. Add the wheelbarrow with flowers in it to the bottom of that.

Open the flower vines, resize then copy and paste as a new layer to the top of the frame. Duplicate it and go to image, mirror.

Now open the clear ball dangle with the leaves on it. Resize then copy and paste as a new layer, moving to the top of the canvas and adjust as needed.

Next open the tube of choice, resize then copy and paste as a new layer. I moved mine so it looked like it was leaning on the house.

Finally add your text, copyrights, license number and tagger markings. Save and your done!

Thank you for tyring my tutorial.